Asus RS100-X7 PI2 User Guide - Page 102
Adapter Properties, RAID Properties, Select New Volume Type, Create RAID 1 Volume
View all Asus RS100-X7 PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
4. The Adapter Properties screen appears. Use the arrow keys to select RAID Properties, then press . LSI Corp Config Utility Adapter Properties -- SAS2008 v7.07.00.00 (2010.04.30) Adapter PCI Slot PCI Address(Bus/Dev) MPT Firmware Revision SAS Address NVDATA Version Status Boot Order Boot Support SAS 2008 00 01:00 8.00.00.00-IR 500E0180:00010424 07.01 Enabled 0 [Enabled BIOS & OS] RAID Properties SAS Topology Advanced Adapter Properties Esc = Exit Menu F1/Shift+1 = Help Enter = Select Item -/+/Enter = Change Item 5. The Select New Volume Type screen appears. Use the arrow keys to select Create RAID 1 Volume, then press . LSI Corp Config Utility v7.07.00.00 (2010.04.30) Select New Volume Type -- SAS2008 Create RAID 1 Volume Create RAID 1E/10 Volume Create RAID 0 Volume Create a RAID 1 volume consisting of 2 disks plus up to 2 optional hot spares. ALL DATA on volume disks will be DELETED! Create a RAID 1E or RAID 10 volume consisting of 3 to 10 disks including up to 2 optional hot spares. ALL DATA on volume disks will be DELETED! Create a RAID 0 volume consisting of 2 to 10 disks. ALL DATA on volume disks will be DELETED! Esc = Exit Menu F1/Shift+1 = Help Enter = Choose volume type to create 6-16 Chapter 6: RAID configuration