Asus RS100-X7 PI2 User Guide - Page 97
Rebuilding the RAID, Exiting the Intel, Rapid Storage Technology utility
View all Asus RS100-X7 PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
6.2.6 Exiting the Intel® Rapid Storage Technology utility To exit the utility: 1. From the utility main menu, select 5. Exit, and then press . The following warning message appears. [ CONFIRM EXIT ] Are you sure you want to exit? (Y/N): 2. Press to exit or press to return to the utility main menu. 6.2.7 Rebuilding the RAID This option is only for the RAID 1 set. Rebuilding the RAID with other non-RAID disk If any of the SATA hard disk drives included in the RAID 1 array failed, the system displays the status of the RAID volume as "Degraded" during POST. You can rebuild the RAID array with other installed non-RAID disks. To rebuild the RAID with other non-RAID disk: 1. At the prompt, press + to enter the Intel Rapid Storage Technology option ROM utility. 2. If there is a non-RAID SATA Hard Disk available, the utility will prompt to rebuild the RAID. Press , and then use up/down arrow keys to select the destination disk or press to exit. [ DEGRADED VOLUME DETECTED ] "Degraded" volume and disk available for rebuilding detected. Selecting a disk initiates a rebuild. Rebuild completes in the operating system. Select the port of destination disk for rebuilding (ESC to exit): Port Drive Model Serial # Size X XXXXXXXXXXX XXXXXXXX XX.XGB [↑↓]-Previous/Next [ENTER]-Select [ESC]-Exit Select a destination disk with the same size as the original hard disk. ASUS RS100-X7 6-11