Asus RS100-X7 PI2 User Guide - Page 103
Create New Volume, RAID Disk, Save changes, then exit this menu
View all Asus RS100-X7 PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
6. The Create New Volume screen shows the disks you can add to make up the RAID 1 volume. Use the arrow key to select a disk, then move the cursor to the RAID Disk column. To include this disk in the array, press , , or . LSI Corp Config Utility Create New Volume -- SAS2008 Volume Type: Volume Size(GB): Slot Device Identifier Num 0 ATA ST3160812AS E 1 ATA ST3160812AS E 2 ATA ST3160812AS E 3 ATA ST3160812AS E v7.07.00.00 (2010.04.30) RAID 1 ------- RAID Drive Pred Disk Status Fail [No No [No No [No No [No No Size (GB) 149 149 149 149 Esc = Exit Menu F1/Shift+1 = Help SPACE/+/- = Select disk for volume C = Create volume By default, the RAID Disk field shows No before volume creation. This field is grayed out under the following conditions: • The disk does not meet the minimum requirements for use in a RAID volume. • The disk is not large enough to mirror existing data on the primary drive. • The disk is already part of another volume. 7. Repeat step 6 to add the second disk to the volume. 8. When done, press to create the volume, then select Save changes then exit this menu. Create and save new volume? Cancel Exit Save changes then exit this menu Discard changes then exit this menu Exit the Configuration Utility and Reboot 9. The utility creates the volume. LSI Corp Config Utility v7.07.00.00 (2010.04.30) Processing...may take up to 1 minute Creating RAID Volume... ASUS RS100-X7 6-17