Asus SABERTOOTH X58 Sabertooth X58 user's manual - Page 90
Wait For 'F1' If Error [Enabled]
View all Asus SABERTOOTH X58 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
3.8.2 Boot Settings Configuration SABERTOOTH X58 BIOS Setup Boot Boot Settings Configuration Quick Boot Full Screen Logo AddOn ROM Display Mode Bootup Num-Lock Wait For 'F1' If Error Hit 'DEL' Message Display [Enabled] [Enabled] [Force BIOS] [On] [Enabled] [Enabled] Allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system. Quick Boot [Enabled] [Disabled] When set to [Disabled], BIOS performs all the POST items. [Enabled] When set to [Enabled], BIOS skips some power on self tests (POST) while booting to decrease the time needed to boot the system. Full Screen Logo [Enabled] [Enabled] Enables the full screen logo display feature. [Disabled] Disables the full screen logo display feature. Set this item to [Enabled] to use the ASUS MyLogo 2™ feature. AddOn ROM Display Mode [Force BIOS] [Force BIOS] The third-party ROM messages will be forced to display during the boot sequence. [Keep Current] The third-party ROM messages will be displayed only if the third-party manufacturer had set the add-on device to do so. Bootup Num-Lock [On] [Off] Sets the power-on state of the NumLock to [Off]. [On] Sets the power-on state of the NumLock to [On]. Wait For 'F1' If Error [Enabled] [Disabled] Disables this function. [Enabled] The system waits for the key to be pressed when error occurs. Hit 'DEL' Message Display [Enabled] [Disabled] Disables this function. [Enabled] The system displays the message "Press DEL to run Setup" during POST. Chapter 3 3-32 Chapter 3: BIOS setup