Asus T2-PH1 User Guide - Page 96
PEG Buffer Length [Auto], Graphic Adapter Priority [PCI-Express/Int-VGA], Internal Graphics Mode
UPC - 610839552757
View all Asus T2-PH1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Graphic Adapter Priority [PCI-Express/Int-VGA] Allows selection of the graphics controller to use as a primary boot device. Configuration options: [Internal VGA] [PCI Express/Int-VGA] [PCI Express/ PCI] [PCI/PCI Express] [PCI/Int-VGA] Internal Graphics Mode Select [Enabled, 8MB] Allows selection of the amount of system memory pre-allocated by the internal graphics device. Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 4 MB] [Enabled, 8 MB] [Enabled, 16 MB] [Enabled, 32 MB] Fixed Graphic Memory Size [32 MB] Allows selection of the size of graphic memory used by fixed mode. Configuration options: [0 MB] [32 MB] [64 MB] [128 MB] DVMT Graphic Memory Size [32 MB] Allows selection of the size of graphic memory used by DVMT mode. Configuration options: [0 MB] [32 MB] [64 MB] [128 MB] [224 MB] PEG Port [Enabled] Enables or disables the PCI Express Graphics port. Configuration options: [Disabled] [Enabled] PEG Force x 1 [Disabled] Enables or disables the PCI Express Graphics force x1. Configuration options: [Disabled] [Enabled] The above item appears only when the P E G P o r t item is set to Enabled. PEG Buffer Length [Auto] Sets the PCI Express Graphics card buffer length. Configuration options: [Auto] [Long] [Short] 5-24 Chapter 5: BIOS setup