Asus TR-DL TR-DLS User Manual - Page 32

Floppy Disk Drive Connector 34-1 pin FLOPPY

Get Asus TR-DL PDF manuals and user guides View all Asus TR-DL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

3. HARDWARE SETUP 2) IDE/SCSI Activity LED (2-pin HDLED) This connector supplies power to the chassis activity LED. Read and write activity by devices connected to the primary/secondary IDE and SCSI connectors cause the LED to light up. TR-DLS TIP: If the case-mounted LED does not light, try reversing the 2-pin plug. HD_LED + TR-DLS HD Activity LED 3) Floppy Disk Drive Connector (34-1 pin FLOPPY) This connector supports the provided floppy drive ribbon cable. After connecting the single end to the board, connect the two plugs on the other end to the floppy drives. (Pin 5 is removed to prevent inserting in the wrong orientation when using ribbon cables with pin 5 plugged). TR-DLS NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. PIN 1 TR-DLS Floppy Disk Drive Connector 3. H/W SETUP Connectors 32 ASUS TR-DLS User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
32
3. HARDWARE SETUP
ASUS TR-DLS User’s Manual
3. H/W SETUP
Connectors
2)
IDE/SCSI Activity LED (2-pin HDLED)
This connector supplies power to the chassis activity LED. Read and write activity
by devices connected to the primary/secondary IDE and SCSI connectors cause
the LED to light up.
3)
Floppy Disk Drive Connector (34-1 pin FLOPPY)
This connector supports the provided floppy drive ribbon cable. After connecting
the single end to the board, connect the two plugs on the other end to the floppy
drives.
(Pin 5 is removed to prevent inserting in the wrong orientation when
using ribbon cables with pin 5 plugged).
TR-DLS
TR-DLS HD Activity LED
HD_LED
TIP:
If the case-mounted LED does not
light, try reversing the 2-pin plug.
+
-
TR-DLS
NOTE:
Orient the red markings on
the floppy ribbon cable to PIN 1.
TR-DLS Floppy Disk Drive Connector
PIN 1