Asus TR-DL TR-DLS User Manual - Page 36
ASUS TR-DLS User's Manual, SMBus Connector 6-1 pin SMB, BPSMB, USB Header 10-1 pin USBPORT
View all Asus TR-DL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
3. H/W SETUP Connectors 3. HARDWARE SETUP 9) SMBus Connector (6-1 pin SMB, BPSMB) These connectors allow you to connect SMBus (System Management Bus) devices. SMBus devices communicate by means of the SMBus with an SMBus host and/or other SMBus devices. SMBus is a specific implementation of an I2C bus, which is a multi-device bus; that is, multiple chips can be connected to the same bus and each one can act as a master by initiating data transfer. The BPSMB connector is for a backplane board that supports an SMBus interface. TR-DLS SMB BPSMB 1 1 FLOATING SMBCLK Ground SMBDATA +5V FLOATING SMBCLK Ground SMBDATA +5V TR-DLS SMBus Connectors 10) USB Header (10-1 pin USBPORT) If the USB ports at the back panel are inadequate, one USB header is available for two additional USB port connectors. Connect the USB header to a 2-port USB connector set and mount the bracket to an open slot in the chassis. USBPORT 61 TR-DLS USB Power USB Power USBP3- USBP2- USBP3+ USBP2+ GND GND NC 10 5 TR-DLS USB Header 36 ASUS TR-DLS User's Manual