Asus TR-DL TR-DLS User Manual - Page 37

3. H/W SETUP Connectors 3. HARDWARE SETUP 11) ATX Power Connector (20/24-pin block ATXPWR) This connector is for an ATX power supply with 20/24-pin power connector. The connector from the power supply is designed to fit this connector in only one orientation. Find the proper orientation and push down firmly until the plug completely fits in. IMPORTANT: Make sure that your ATX power supply can supply at least 720mA on the +5-volt standby lead (+5VSB). The system may become unstable and may experience difficulty powering up if the power supply is inadequate. It is recommended that you purchase a power supply with 24-pin power connector. 1 +3 Volts +3 Volts +3 Volts -12 Volts Ground Ground +5 Volts PSON# TR-DLS Ground Ground For Power Supply with 20-pin +5 Volts Ground Power Connector Ground Ground Power OK -5 Volts +5V Standby +5 Volts +12 Volts +5 Volts +12 Volts +5 Volts +3 Volts Ground TR-DLS ATX Power Connector 24-pin Power Connector 12) ASMC Connector (50-pin eRMC ) This connector allows you to connect the optional ASMC-LE or ASMC-ME card using an ASMC interface cable. Install the ASMC card into the PCI6 slot and connect the cable from the card to this connector. The PCI6 slot on the motherboard has a Low Pin Count (LPC) signal connector to accommodate the ASMC card. TR-DLS TR-DLS ASMC Connector ASUS TR-DLS User's Manual 37