Asus TS700-E4 User Manual - Page 128

Com Port Address [Disabled] Allows you to disable or select the COM port to use. Configuration options: [Disabled] [Onboard COM1 port] [Onboard COM2 port] The following items appear only if you set the Com Port Address item to [Onboard COM1 port] or [Onboard COM2 port]. Baud Rate [115.2K] Allows you to enable the specified baud rate. Configuration options: [300] [1200] [2400] [9600] [19.2K] [38.4K] [57.6K] [115.2K] Console Type [PC-ANSI, 7bit] Allows you to enable the specified console type. Configuration options: [VT100] [VT100, 8bit] [PC-ANSI, 7bit] [PC ANSI] [VT100+] [VT-UTF8] [ASCII] Flow Control [CTS/RTS] Allows you to select the flow control for console redirection. Configuration options: [None] [XON/XOFF] [CTS/RTS] Console connection [Direct] Allows you to select the console connection. [Direct] indicates that the console is connected directed to the system. [Via modem] indicates that a modem is used to connect. Configuration options: [Direct] [Via modem] Continue C.R. after POST [Off] Set this item to [On] if you want console redirection to continue after the operating system has loaded. Configuration options: [Off] [On] # of video pages to support [1] Allows you to set the number of video pages to allocate for console redirection when the video hardware is not available. Press or to set the value, or enter the value using the numeric keypad. Configuration options: [1] ~ [8] 4-38 Chapter 4: BIOS setup