Asus V2-AE1 User Guide - Page 32
Installing storage drives
View all Asus V2-AE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
2.7 Installing storage drives 2.7.1 Optical drive The system supports up to two 5.25" optical drives such as CD-ROM, CD-RW, DVD-ROM, and DVD-RW drives. To install an optical drive: 1. Place the chassis upright, then remove the upper 5.25" drive bay metal plate cover. 2. Insert the optical drive to the bay, then carefully push the drive until its screw holes align with the holes on the bay. 3. Secure the optical drive with two screws on both sides of the bay. 2 3 3 4. Connect the audio (A), IDE (B), and power (C) plugs to connectors at the back of the drive. C A B 5. Connect the other end of the IDE cable to the secondary IDE connector (labeled SEC_IDE) on the motherboard. See page 4-6 for the connector location. 6. Connect the other end of the audio cable to the 4-pin connector labeled CD on the motherboard. See page 4-9 for the connector location. 2-16 Chapter 2: Basic installation