Asus V3-M2V890 V3-M2V890 English Edition User's Manual - Page 84

5.5.5 Hardware Monitor Hardware Monitor CPU Temperature [48ºC/118ºF] MB Temperature [35ºC/95ºF] CPU Fan Speed [3260RPM] Chassis Fan Speed [N/A] VCORE Voltage [ 1.504V] 3.3V Voltage [ 3.360V] 5V Voltage [ 5.160V] 12V Voltage [11.328V] Smart Q-Fan Function [Disabled] CPU temperature beep function [Enabled] CPU temperature high limit [95 degree] CPU Temperature CPU Temperature [xxxºC/xxxºF] MB Temperature [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures. Select Ignored if you do not wish to display the detected temperatures. CPU Fan Speed [xxxxRPM] or [N/A] Chassis Fan Speed [xxxxRPM] or [N/A] The onboard hardware monitor automatically detects and displays the CPU and chassis fan speeds in rotations per minute (RPM). If any of the fans is not connected to the motherboard, the specific field shows N/A. VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. Smart Q-Fan function [Disabled] Allows you to enable or disable the smart Q-fan control function. When this field is set to [Enabled], the item Fan Auto Mode Start Speed, Fan Auto Mode Start Speed Temp, and Fan Auto Mode Full Speed Temp items appear. Configuration options: [Disabled] [Enabled] Fan Auto Mode Start Speed [40%] Sets the fan auto mode start speed. Configuration options: [20%] [40%] [60%] [80%] Fan Auto Mode Start Speed Temp [25ºC] Sets the fan auto mode start speed temperature. Configuration options: [25ºC] [26ºC] - [50ºC] 5-26 Chapter 5: BIOS setup