Asus WL-320gP User Manual - Page 38
DTIM Interval 1-255, Beacon Interval 1-65535, Enable Frame Bursting?, Radio Power, Enable WMM No-
UPC - 610839730476
View all Asus WL-320gP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Chapter 3 - Software Configuration DTIM Interval (1-255) - DTIM (Delivery Traffic Indication Message) is a wireless message used to inform clients in Power Saving Mode when the system should wake up to receive broadcast and multicast messages. Type the time interval in which the system will broadcast a DTIM for clients in Power Saving Mode. The default value (3) is recommended Beacon Interval (1-65535) - This field indicates the time interval in milliseconds that a system broadcast packet, or beacon, is sent to synchronize the wireless network. The default value (100 milliseconds) is recommended. Enable Frame Bursting? - This field allows you to enable frame-bursting mode to improve performance with wireless clients that also support framebursting. Radio Power - Radio Power can be set between 1 to 84 but the default value is recommended. Enable WMM - This field allows you to enable WMM to improve multimedia transmission Enable WMM No-Acknowledgement - This field allows you to enable WMM No-Acknowledgement Mode - This field allows you set up different operation modes(AP or WDS, Station or URE) either in AP mode or Gateway mode. 3. Software Access Point URE - This section allows you set up parameters for URE. This section only works while in URE mode. SSID - This is the SSID of root AP. The ASUS 802.11g AP can repeat the signal and boost the signal coverage while setting in URE mode. Other security parameters settings are the same as those in Wireless -> Interface. 38 ASUS 802.11g Access Point