Asus WL-320gP User Manual - Page 42
Firmware Upgrade, 11.2 SNMP in AP mode
UPC - 610839730476
View all Asus WL-320gP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Chapter 3 - Software Configuration 3.11.1 Firmware Upgrade 3. Software Web (Common) This page reports the Flash Code (Firmware) version installed in the ASUS 802.11g AP. Periodically, a new Flash Code is available for the ASUS 802.11g APs on ASUS's Web site. You can update the ASUS 802.11g AP's Flash Code using the Firmware Upgrade page under the Advanced Setup menu of the Web Manager. If you are experiencing a problem with your ASUS WLAN equipment, a Technical Support representative may ask you to give your device's Flash Code (Firmware) version. Note: The firmware upgrade takes approximately 60 to 90 seconds. When the firmware upgrade is completed, you will be directed to the home page. 3.11.2 SNMP (in AP mode) Simple Network Management Protocol (SNMP) is a popular network monitoring and management protocol. It allows network administrators to monitor the status of the Access Point and receive notification of any critical events as they occur on the Access Point. You can set up the AP property for SNMP control in System Setup-> SNMP webpage, Click Save to apply your change. Install the SNMP utility and the MIB file provided in the utility CD. 42 ASUS 802.11g Access Point