Behringer ULTRAZONE ZMX8210 Manual - Page 10

ULTRAZONE ZMX8210 5. Specifications INPUTS 1 - 6 Type Impedance Max. input level Euro-type connector, electronically balanced 3 kΩ balanced, 1.5 kΩ unbalanced (with PAD) + 12 dBu (with PAD) Max. gain Crosstalk Common-mode rejection ratio (CMRR) 40 dB > 63 dB @ 1 kHz > 75 dB @ 1 kHz, 22 Hz - 22 kHz Equivalent input noise (EIN) INPUTS 7 - 8 Type -116 dBu A-weighted; terminated with 150 Ω RCA connectors, unbalanced Impedance Max. input level Max. gain 10 kΩ, unbalanced + 15 dBu 15 dB OUT L, OUT R, AUX Type Max. gain Euro-type connector, balanced 22 dB Max. gain (input/output) Impedance Max. output level 62 dB (without PAD) 60 Ω, unbalanced, 120 Ω, balanced + 21 dBu unbalanced/balanced Crosstalk (output/output) Noise (all level controls down) Signal-to-noise ratio BUS LINKS Type Impedance Max. output level > 63 dB @ 1 kHz -105 dBu A-weighted 87 dB @ 0 dB A-weighted Euro-type connector, unbalanced approx. 150 Ω + 21 dBu REMOTE Type Volume control Euro-type connector 30 dB attenuation with 10 kΩ potentiometer (not included) 60 dB attenuation with 100 kΩ potentiometer (not included) Channel select 7/8 EQ MIC LOW CUT Push-button switch (1 pin) required (not included) High-pass filter; Cutoff frequency: 100 Hz LOW LOW MID HIGH MID ± 15 dB @ 70 Hz ± 15 dB @ 300 Hz ± 15 dB @ 3 kHz HIGH SYSTEM SPECIFICATIONS Frequency response ± 15 dB @ 10 kHz 20 Hz - 22 kHz ± 0.5 dB Distortion (THD+N) POWER SUPPLY Power consumption < 0.05 % max. 25 W Fuse DIMENSIONS/WEIGHT Dimensions T 630 mA H 250 V (100 - 120 V ~, 50/60 Hz) T 315 mA H 250 V (220 - 230 V ~, 50/60 Hz) approx. 1 3/4" x 19" x 8 1/2" (approx. 44.5 mm x 482.6 mm x 217 mm) Weight approx. 4.9 lb. (2.2 kg) BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated. 10 Specifications