Behringer X32-TP Quickstart Guide - Page 9

Matrix Mixes

Get Behringer X32-TP PDF manuals and user guides View all Behringer X32-TP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Matrix Mixes • Matrix mixes can be fed from any mix bus as well as the MAIN LR and Center/Mono bus. • To send to a Matrix, first press the select button above the bus you want to send. Use the 4 rotary encoders in the BUS SENDS section of the channel strip. Encoders 1-4 will send to Matrix 1-4. Press the 5-8 button to use the first two encoders to send to Matrix 5-6. If you press the "view" button, you will get a detailed view of the 6 Matrix sends for the selected Bus. • Access the Matrix mixes using layer 4 on the output faders. Select a Matrix mix in order to access its' channel strip, including dynamics with 6-band parametric EQ and x-over. • For a stereo Matrix, select a Matrix and press the "view" button near the CONFIG/PREAMP section of the channel strip. Press the first encoder near the screen to link, forming a stereo pair. Note, stereo panning is handled by even BUS SEND encoders as described on the "Using Buses" page in this guide.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
Matrix Mixes
•
Matrix mixes can be fed from any mix bus as well as the MAIN LR and Center/Mono bus.
•
To send to a Matrix, first press the select button above the bus you want to send. Use the 4 rotary encoders in the
BUS SENDS section of the channel strip. Encoders 1-4 will send to Matrix 1-4. Press the 5-8 button to use the first
two encoders to send to Matrix 5-6. If you press the “view” button, you will get a detailed view of the 6 Matrix
sends for the selected Bus.
•
Access the Matrix mixes using layer 4 on the output faders. Select a Matrix mix in order to access its’ channel
strip, including dynamics with 6-band parametric EQ and x-over.
•
For a stereo Matrix, select a Matrix and press the “view” button near the CONFIG/PREAMP section of the
channel strip. Press the first encoder near the screen to link, forming a stereo pair. Note, stereo panning is
handled by even BUS SEND encoders as described on the “Using Buses” page in this guide.