Belkin ME1002-NB User Manual - Page 77
Restart the computer. When the computer restarts, your network, adapters are now con d for use
View all Belkin ME1002-NB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Manually Configuring Network Settings 4. Write in the IP address and subnet mask from the "IP Address" tab (3). 1 5. Click the "Gateway" tab (2). Write the gateway address down in the chart. 2 6. Click the "DNS Configuration" tab (1). Write the DNS address(es) in 3 the chart. 4 7. If not already selected, select "Obtain IP address automatically" in the "IP Address" tab. Click "OK". Restart the computer. When the computer restarts, your network 5 adapter(s) are now configured for use with the Router. 6 Set up the computer that is connected to the DSL or cable modem FIRST 7 using these steps. You can also use these steps to add computers to your Router after the Router has been set up to connect to the Internet. 8 9 10 section 73
7
8
9
10
73
2
1
3
4
5
6
section
Manually Configuring Network Settings
4.
Write in the IP address and subnet mask from the
“IP Address” tab
(3)
.
5.
Click the “Gateway” tab
(2)
. Write the gateway address down in
the chart.
6.
Click the “DNS Configuration” tab
(1)
. Write the DNS address(es) in
the chart.
7.
If not already selected, select “Obtain IP address automatically” in the
“IP Address” tab. Click “OK”.
Restart the computer. When the computer restarts, your network
adapter(s) are now configured for use with the Router.
Set up the computer that is connected to the DSL or cable modem FIRST
using these steps. You can also use these steps to add computers to your
Router after the Router has been set up to connect to the Internet.