BenQ BenQ HC1200 sRGB DLP Projector User Manual - Page 35
Setting the presentation timer, Resetting current or all picture modes
View all BenQ BenQ HC1200 sRGB DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Please refer to the illustration to the right for how the colors relate to each other. For example, if you select Red and set its range at 0, only pure red in the projected RED Yellow GREEN picture will be selected. Increasing its range will include red close to yellow and red close to magenta. 5. Press ▼ to highlight Saturation and adjust Magenta Cyan its values to your preference by pressing ◄/ ►. Every adjustment made will reflect to the BLUE image immediately. For example, if you select Red and set its value at 0, only the saturation of pure red will be affected. Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a setting of "0" removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic. 6. Press ▼ to highlight Gain and adjust its values to your preference by pressing ◄/►. The contrast level of the primary color you select will be affected. Every adjustment made will reflect to the image immediately. 7. Repeat steps 3 to 6 for other color adjustments. 8. Make sure you have made all of the desired adjustments. 9. Press MENU/EXIT to exit and save the settings. Resetting current or all picture modes 1. Go to the Picture menu and highlight Reset Picture Settings. 2. Press MODE/ENTER and press ▲/▼ to select Current or All. • Current: returns current picture mode to the factory preset settings. • All: returns all settings, except User 1/User 2 in the Picture menu to the factory preset settings. Setting the presentation timer Presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Go to the System Setup: Basic > Presentation Timer menu and press MODE/ ENTER to display the Presentation Timer page. 2. Highlight Timer Period and decide the time period by pressing ◄/►. The length of time can be set from 1 to 5 minutes in 1-minute increments and 5 to 240 minutes in 5-minute increments. If the timer is already on, the timer will restart whenever the Timer Period is reset. Operation 35