BenQ BenQ HC1200 sRGB DLP Projector User Manual - Page 52
System Setup: Advanced menu, Network, Settings, Reset All, Information menu, Current, System, Status
View all BenQ BenQ HC1200 sRGB DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
5. System Setup: Advanced menu FUNCTION Network Settings Reset All Settings DESCRIPTION Wired LAN AMX Device Discovery When AMX Device Discovery is On, the projector can be detected by AMX controller. MAC Address Displays the mac address for this projector. Returns all settings to the factory preset values. The following settings will still remain: Position, Phase, H. Size, Projector Installation, Language, High Altitude Mode, Security Settings, Baud Rate. Current System Status Source Shows the current signal source. Picture Mode Shows the selected mode in the Picture menu. Resolution Shows the native resolution of the input signal. Lamp Mode Shows the current lamp mode. 3D Format Shows the current 3D mode. Color System Shows input system format, NTSC, PAL, SECAM or RGB. Equivalent Lamp Hour Displays the number of hours the lamp has been used. Firmware Version Displays the firmware version of the projector. The Information menu shows you the current operating status of the projector. 6. Information menu 52 Operation