BenQ BenQ HC1200 sRGB DLP Projector User Manual - Page 36
Remote paging operations, To cancel the timer, perform the following steps, Selection, Description
View all BenQ BenQ HC1200 sRGB DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
3. Press ▼ to highlight Timer Display and choose if you want the timer to show up on the screen by pressing ◄/►. Selection Always 3 min/2 min/1 min Never Description Displays the timer on screen throughout the presentation time. Displays the timer on screen in the last 3/2/1 minute(s). Hides the timer throughout the presentation time. 4. Press ▼ to highlight Timer Position and set the timer position by pressing ◄/►. 5. Press ▼ to highlight Timer Counting Direction and select your desired counting direction by pressing ◄/►. Selection Count Up Count Down Description Increases from 0 to the preset time. Decreases from the preset time to 0. 6. Press ▼ to highlight Sound Reminder and decide if you want to activate sound reminder by pressing ◄/►. If you select On, a double beep sound will be heard at the last 30 seconds of counting down/up, and a triple beep sound will be produced when the timer is up. 7. To activate the presentation timer, press ▼ and press ◄/► to highlight On and press MODE/ENTER. 8. A confirmation message appears. Highlight Yes and press MODE/ENTER on the projector or remote control to confirm. You will see the message "Timer is On" appearing on the screen. The timer starts counting when the timer is on. To cancel the timer, perform the following steps: 1. Go to the System Setup: Basic > Presentation Timer menu and highlight Off. Press MODE/ENTER. A confirmation message appears. 2. Highlight Yes and press MODE/ENTER to confirm. You will see the message "Timer is Off" appearing on the screen. Remote paging operations Connect the projector to your PC or notebook with a USB cable prior to using the paging function. See "Connection" on page 19 for details. You can operate your display software program (on a connected PC) which responds to page up/down commands (like Microsoft PowerPoint) by pressing PAGE +/PAGE - on the remote control. If remote paging function doesn't work, check if the USB connection is correctly made and the mouse driver on your computer is updated to the latest version. The remote paging function cannot work with Microsoft® Windows® 98 operating system. Windows® XP or higher operating systems are recommended. 36 Operation