BenQ MS500 MS500 User Manual - Page 15
Connection
View all BenQ MS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. • In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 8). They are commercially available from electronics stores. • The connection illustrations below are for reference only. The rear connecting jacks available on the projector vary with each projector model. Notebook or desktop computer A/V device Monitor (VGA) 1 (DVI) 2 3 17 4 756 or Speakers 7 or 1. VGA cable 5. S-Video cable 2. VGA to DVI-A cable 6. Video cable 3. USB cable 7. Audio cable 4. Component Video to VGA (D-Sub) adapter cable • Many notebooks do not turn on their external video ports when connected to a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press FN and the labeled function key simultaneously. Refer to your notebook's documentation to find your notebook's key combination. Connection 15