BenQ MS500 MS500 User Manual - Page 39

1. DISPLAY menu Function Description Teaching Template (only for MX501/ MX501-V) Provides several preset patterns for various teaching purposes. Choose Blackboard or Whiteboard first by pressing / and press / to choose the pattern you need. Press MODE/ENTER to activate the pattern. Picture Mode Reference Mode Brightness Contrast Color Tint Sharpness Brilliant Color Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a picture mode" on page 27 for details. Selects a picture mode that best suits your need for the image quality and further fine-tune the image based on the selections listed on the same page below. See "Setting the User 1/User 2 mode" on page 27 for details. Adjusts the brightness of the image. See "Adjusting Brightness" on page 28 for details. Adjusts the degree of difference between dark and light in the image. See "Adjusting Contrast" on page 28 for details. Adjusts the color saturation level -- the amount of each color in a video image. See "Adjusting Color" on page 28 for details. This function is only available when a Video, S-Video or Component Video signal is selected. Adjusts the red and green color tones of the image. See "Adjusting Tint" on page 28 for details. This function is only available when a Video or S-Video signal is selected and the system format is NTSC. Adjusts the image to make it look sharper or softer. See "Adjusting Sharpness" on page 28 for details. This function is only available when a Video, S-Video or Component Video signal is selected. See "Adjusting Brilliant Color" on page 28 for details. Color Temperature See "Selecting a color temperature" on page 28 for details. 3D Color Management See "3D Color Management" on page 29 for details. Save Settings Saves the settings made for User 1 or User 2 mode. 2. PICTURE menu Operation 39