BenQ MS500 MS500 User Manual - Page 38

1. DISPLAY menu Description of each menu Function Wall Color Aspect Ratio Keystone Position Phase Description Corrects the projected picture's color when the projection surface is not white. See "Using Wall Color" on page 27 for details. There are several options to set the image's aspect ratio depending on your input signal source. See "Selecting the aspect ratio" on page 24 for details. Corrects any keystoning of the image. See "Switching input signal" on page 23 for details. Displays the position adjustment page. To move the projected image, use the directional arrow keys. The values shown on the lower position of the page change with every key press you made until they reach their maximum or minimum. This function is only available when a PC signal (analog RGB) is selected. Adjusts the clock phase to reduce image distortion. H. Size Digital Zoom 3D Sync 3D Sync Invert This function is only available when a PC signal (analog RGB) is selected. Adjusts the horizontal width of the image. This function is only available when a PC signal (analog RGB) is selected. Magnifies or reduces the projected image. See "Magnifying and searching for details" on page 24 for details. This projector features a 3D function which enables you to enjoy the 3D movies, videos, and sporting events in a more realistic way by presenting the depth of the images. You need to wear a pair of 3D glasses to view the 3D images. • Only for PC type signal: When the vertical frequency is 120Hz, and the content being projected is made with 3D technology, selecting Frame Sequential will present the 3D images. When the 3D Sync function is on: • The brightness level of the projected image will decrease. • The Picture Mode cannot be adjusted. • The Keystone can only be adjusted within limited degrees. When you discover the inversion of the image depth, enable this function to correct the problem. 38 Operation