BenQ MX813ST Short-Throw DLP Projector User Manual

BenQ MX813ST Short-Throw DLP Projector Manual

Get BenQ MX813ST Short-Throw DLP Projector PDF manuals and user guides View all BenQ MX813ST Short-Throw DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals

BenQ MX813ST Short-Throw DLP Projector manual content summary:

  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 1
    MX813ST Digital Projector User Manual Welcome
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 2
    Table of contents Important safety instructions 3 Introduction 7 Projector features 7 Shipping contents 8 Projector exterior view 47 Maintenance 59 Care of the projector 59 Lamp information 60 Troubleshooting......... 66 Specifications 67 Dimensions 68 Ceiling mount installation 68 Wall
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 3
    that you follow the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before 4. you operate protector or uninterruptible power supply (UPS). 3. Refer servicing to qualified service personnel. 6. Do not block the projection lens with
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 4
    Safety Instructions (Continued) 7. The lamp becomes extremely hot during operation. Allow the on rare death if you should come into occasions. contact with live parts. The only user serviceable part is the lamp which has its own removable cover. Under no circumstances should you ever undo
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 5
    Safety Instructions (Continued) 13. Do not place this projector in any of 14. Do not block the ventilation holes. the following environments. above 40°C / 104°F - Locations where the altitudes are higher than 3000 m (10000 feet). 3000 m (10000 feet) 0 m (0 feet) Important safety instructions 5
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 6
    Safety Instructions (Continued) 16. Do not stand the projector on end 18. Do not does become wet, disconnect it from the power supply's wall socket and call BenQ to have the projector serviced. 17. Do not step on the projector or place any objects upon it. Besides probable physical damage to
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 7
    design to deliver high reliability and ease of use. The projector offers the following features. • HDMI • LAN control function • 3D Ready supported • Variable audio output • Wall color correction allowing projection on surfaces of several predefined colors • Quick auto search speeding up the signal
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 8
    in some specific regions. Please consult your dealer for detailed information. Projector QDiugiictkal SPtraortjeGctuoirde Quick start guide Power cord VGA cable User manual CD Warranty card* Pull the tab before using the remote control. Remote control with battery Optional accessories
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 9
    Projector exterior view Front/upper side 1 2 3 4 5 Rear/lower side 11 12 13 14 15 16 17 18 19 1. External control panel (See "Projector" on page 10 for details.) 2. Lamp cover 6 3. Focus ring 4. Projection lens 5. Lens cover 7 6. Top IR remote sensor 7. Vent (heated air exhaust) 8 8. Speaker 9 9.
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 10
    6. Keystone/Arrow keys ( / Up, / Down) Manually corrects distorted images resulting from an angled projection. See "Correcting the or flashes when the lamp has developed a projector" on page 25 for details. problem. See "Indicators" on page 65 for Lights up or flashes when the projector is
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 11
    Mounting the projector We want you to have a pleasant experience using your BenQ projector, so we need to bring this safety matter to your attention to prevent possible damage to person and property. If you intend to mount your projector on the ceiling or wall, we strongly recommend that you use a
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 12
    /down arrows when connected through USB to a PC. See "Remote paging operations" on page 39 for details. Keystone/Arrow keys ( / Up, / Down) Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 27 for details. Auto Automatically determines the best
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 13
    . • Replace only with the same or equivalent type recommended by the battery manufacturer. • Dispose of the used battery according to the battery manufacturer's instructions. • Never throw a battery into a fire. There may be danger of an explosion. • If the battery is dead or if you will not be
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 14
    Positioning your projector Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 15
    Obtaining a preferred projected image size The distance from the projector lens to the screen, the zoom setting (if available), and the video format each factors in the projected image size. The projector should always be placed horizontally level (like flat on a table), and positioned directly
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 16
    How to determine the position of the projector for a given screen size 1. Select your screen size. 2. Refer to the table on page 17 and find the closest match to your screen size in the left columns labelled "Screen size". Using this value, look across this row to the right to find the corresponding
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 17
    Projection dimensions Refer to "Dimensions" on page 68 for the center of lens dimensions of this projector before calculating the appropriate position. Maximum zoom Minimum zoom Screen Center of lens Vertical offset Projection distance Screen size Diagonal W H Distance from screen (mm) Inch
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 18
    Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. • In the connections shown below, some cables may not be included with the
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 19
    Connecting a computer or monitor Connecting a computer The projector can connect to both IBM® compatibles and Macintosh® computers. A Mac adapter is needed if you are connecting legacy version Macintosh computers. To connect the projector to a notebook or desktop computer (using VGA): 1. Take the
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 20
    well as on the screen, you can connect the MONITOR-OUT signal output jack on the projector to an external monitor following the instructions below: To connect the projector to a monitor: 1. Connect the projector to a computer as described in "Connecting a computer" on page 19. 2. Take a suitable VGA
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 21
    Connecting Video source devices You need only connect the projector to a Video source device using just one of the above connecting methods, however each provides a different level of video quality. The method you choose will most likely depend upon the availability of matching terminals on both the
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 22
    it to an HDMI source device like a DVD player, a DTV tuner, a display or a notebook computer. HDMI (High-Definition Multimedia Interface) supports uncompressed video data transmission between compatible devices like DTV tuners, DVD players and displays over a single cable. It provides pure digital
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 23
    Connecting a Component Video source device Examine your Video source device to determine if it has a set of unused Component Video output jacks available: • If so, you can continue with this procedure. • If not, you will need to reassess which method you can use to connect to the device. To connect
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 24
    Connecting an S-Video/composite source device Examine your Video source device to determine if it has an unused S-Video/composite output jack available: • If it has both jacks, use the S-Video output jack for connection as the S-Video terminal provides better picture quality than the Video terminal.
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 25
    90 seconds before energizing the lamp. 4. If the projector is activated for the first time, select your OSD language following the onscreen instructions. 5. If you are prompted for a password, press the arrow keys to enter a six digit password. See "Utilizing the password function" on page
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 26
    You can also press SOURCE on the projector or remote control to select your desired input signal. See "Switching input signal" on page 31 for details. Adjusting the projected image Adjusting the projection angle The projector is equipped with 1 quick-release adjuster foot and 1 rear adjuster foot.
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 27
    occurs when the projector is not perpendicular to the screen. To correct this, besides adjusting the height of the projector, you will need to manually correct it following one of these steps. • Using the remote control Press / on the projector or remote control to display the Keystone correction
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 28
    Using the menus The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings. Below is the overview of the OSD menu. Main menu icon Main menu Highlight Sub-menu Current input signal Status Press MENU/ EXIT to the previous page or to exit. The following
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 29
    display as asterisks on-screen. Write your selected password down here in this manual in advance or right after the password is entered so that it is available to you should you ever forget it. Password Keep this manual in a safe place. 5. To leave the OSD menu, press MENU/EXIT.
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 30
    number and turn off your projector. 3. Seek help from the local BenQ service center to decode the number. You may be required to provide proof of display as asterisks on-screen. Write your selected password down here in this manual in advance or right after the password is entered so that it is
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 31
    is On (which is the default of this projector) if you want the projector to automatically search for the signals. You can also manually cycle through the available input signals. 1. Press SOURCE on the projector or remote control. A source selection bar displays. 2. Press / until your desired signal
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 32
    Magnifying and searching for details If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys for navigating the picture. • Using the remote control 1. Press Digital Zoom+/Digital Zoom- to display the Zoom bar. 2. Press Digital Zoom + to magnify the
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 33
    About the aspect ratio In the pictures below, the black portions are inactive areas and the white portions are active areas. OSD menus can be displayed on those unused black areas. 1. Auto: Scales an image proportionally to fit the projector's native resolution in its horizontal or vertical width.
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 34
    Optimizing the image Selecting a picture mode The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input signal picture type. To select an operation mode that suits your need, you can follow one of the following steps. •
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 35
    Using Wall Color In the situation where you are projecting onto a colored surface such as a painted wall which may not be white, the Wall Color feature can help correct the projected picture's color to prevent possible color difference between the source and projected pictures. To use this function
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 36
    2. Normal: Maintains normal colorings for white. 3. Warm: Makes images appear reddish white. *About color temperatures: There are many different shades that are considered to be "white" for various purposes. One of the common methods of representing white color is known as the "color temperature". A
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 37
    For example, if you select Red and set its value at 0, only the saturation of pure red will be affected. Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a setting of "0" removes that color from the image entirely. If the saturation is too high
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 38
    Setting the presentation timer The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Press Timer Set up on the remote control or go to the SYSTEM SETUP: Basic >
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 39
    on, pressing this key displays a confirmation message. You can decide whether to restart, continue or turn off the timer by following the on-screen instruction. Remote paging operations Connect the projector to your PC or notebook with a USB cable prior to using the paging function. You can operate
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 40
    Freezing the image Press on the remote control to freeze the image. The word 'FREEZE' will display in the screen. To release the function, press any key (except the Page Up/Down key) on the projector or remote control. Even if an image is frozen on the screen, the pictures are running on the video
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 41
    Adjusting the sound level To adjust the sound level, press Volume+/ Volume- on the remote control, or: 1. Repeat steps 1-2 above. 2. Highlight VOLUME and select a desired sound level. Turning off the Power on/off ring tone To turn off the ring tone: 1. Repeat steps 1-2 in Muting the sound section.
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 42
    Controlling the projector through a LAN environment Network Settings allow you to manage the projector from a computer using a web browser when the computer and the projector are properly connected to the same local area network. Configuring the Wired LAN Settings Internet IR Router If you are in a
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 43
    . The Crestron page is only available when you are on a Wired LAN network. It also allows you to control the projector remotely. The Crestron supports RoomView version 6.2.2.9. i i ii i i. These buttons function the same as the ones on the OSD menus or remote control. The Menu button can also be
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 44
    The tools page allows you to manage the projector, configure the LAN control settings and secure access of remote network operation on this projector. i iii ii iv v i. You can name the projector, keep track of its location and the person in charge of it. ii. You can adjust the Wired LAN
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 45
    The info page displays the information and status of this projector. i i. Press exit to go back to the Crestron remote network operation page. Operation 45
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 46
    Shutting down the projector 1. Press II on the projector. A confirmation message displays prompting you. If you don't respond in a few seconds, the message will disappear. If you use the remote control, press II to shut down the projector. 2. Press II on the projector a second time. The POWER
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 47
    Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. Main menu Sub-menu Options Wall Color Off/Light Yellow/Pink/ Light Green/Blue/Blackboard Aspect Ratio Auto/Real/4:3/16:9/16:10 Keystone Position Phase H. Size 1.
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 48
    Timer period Timer display Timer position Presentation Timer Timer counting direction Sound reminder On/Off 1~240 minutes Always/Last 1 Min/Last 2 Min/ Last 3 Min/Never Top-Left/Bottom-Left/Top-Right/ Bottom-Right Count Down/Count Up On/Off Yes/No Language 4. SYSTEM SETUP: Basic Projector
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 49
    High Altitude Mode On/Off Yes/No Mute Off/On Audio Settings Volume Power on/off Ring Tone Off/On Lamp Mode Normal/Economic/Smart Eco Lamp Settings Reset lamp timer Reset/Cancel Equivalent lamp hour Change password Security Settings Change Security Power on Lock Settings Splash Screen
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 50
    1. DISPLAY menu Description of each menu • The default values listed in this manual, especially on pages 50-58, are for reference only. They may vary between the projectors due to the continuous improvement to the products. FUNCTION Wall
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 51
    • The Keystone can only be adjusted within limited degrees. When you discover the inversion of the image depth, enable this function to correct the problem. This function is only enabled when the input signal is PC@120Hz, Video and S-video. Provides some templates as teaching aids. Teachers can use
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 52
    2. PICTURE menu FUNCTION DESCRIPTION Picture Mode Reference Mode Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a picture mode" on page 34 for details. Selects a picture mode that best suits your need for the image
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 53
    2. PICTURE menu FUNCTION Brilliant Color DESCRIPTION Adjusts white peaking while maintaining correct color presentation. See "Adjusting Brilliant Color" on page 35 for details. This function is only available when User 1/2 is selected. Color See "Selecting a Color Temperature" on page 35 for
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 54
    4. SYSTEM SETUP: Basic menu FUNCTION Presentation Timer Language Projector Position Menu Settings Operation Settings DESCRIPTION Reminds the presenter to finish the presentation within a certain time frame. See "Setting the presentation timer" on page 38 for details. Sets the language for the On-
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 55
    enables the projector power to be turned on automatically when VGA signal is detected. Selecting Off enables the projector power to be turned on manually (by keypad or remote). Disables or enables all panel key functions except Power on the projector and keys on the remote control. Background Color
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 56
    rate that is identical with your computer's so that you can connect the projector using a suitable RS-232 cable. This function is intended for qualified service personnel. 56 Operation
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 57
    5. SYSTEM SETUP: Advanced menu FUNCTION Test Pattern Closed Caption Standby Settings Network Settings Reset All Settings DESCRIPTION Selecting On enables the function and the projector displays the grid test pattern. It helps you adjust the image size and focus and check that the projected image
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 58
    6. INFORMATION menu FUNCTION Current System Status DESCRIPTION Source Shows the current signal source. Picture Mode Shows the selected mode in the PICTURE menu. Resolution Shows the native resolution of the input signal. Color System Shows input system format, NTSC, PAL, SECAM, or RGB. Equivalent
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 59
    detergents. These can damage the case. Storing the projector If you need to store the projector for an extended time, please follow the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please refer to "Specifications
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 60
    Lamp information Getting to know the lamp hour When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer. See "Setting Lamp Mode as Economic" below for more information on Economic mode. To obtain the lamp hour information: 1. Press
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 61
    lamp warning displays will remind you to change the lamp. The warning messages below are for reference only. Please follow the actual on-screen instructions to prepare and replace the lamp. Status Message Install a new lamp for optimal performance. If the projector is normally run with Economic
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 62
    Replacing the lamp • Hg - Lamp contains mercury. Manage in accordance with local disposal laws. See www.lamprecycle.org. • If lamp replacement is performed while the projector is suspended upside-down from the ceiling, make sure that no one is underneath the lamp socket to avoid any possible injury
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 63
    3. Remove the lamp cover by (a) sliding the cover toward the side of the projector and (b) lifting it off. (b) • Do not turn the power on with the lamp cover removed. (a) • Do not insert your fingers between the lamp and the projector. The sharp edges inside the projector may cause injuries.
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 64
    7. Tighten the screws that secure the lamp. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screws. 8. Ensure the handle is fully laid flat and locked in place. 9. Replace the lamp cover by sliding it into place. (a) (b) 10. Tighten the screw
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 65
    Indicators Light Status & Description POWER TEMP LAMP Power events Orange Off Green Flashing Off Green Off Orange Flashing Off Lamp events Off Off Off Off Thermal events Off Red Off Red Off Red Off Red Off Stand-by mode Off Powering up Off Normal operation 1. The
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 66
    Troubleshooting The projector does not turn on. Cause Remedy There is no power from the power cable. Plug the power cord into the AC is incorrect Cause Remedy You do not remember the password. Please see "Entering the password recall procedure" on page 35 for details. 66 Troubleshooting
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 67
    (Stereo) 10 watt x 1 Audio signal output PC audio jack x 1 Control RS-232 serial control 9 pin x 1 LAN control RJ45 x 1 (wired) USB B type x 1 (Supports firmware upgrade/page up /page down) Input terminals Computer input RGB input D-Sub 15-pin (female) x 2 Video signal input S-VIDEO Mini DIN 4-pin
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 68
    Dimensions 301.7 mm (W) x 123.4 mm (H) x 240.3 mm (D) 240.3 123.4 301.7 Ceiling mount installation 228.0 68.3 71.2 Ceiling mount screws: M4 x 8 (Max. L = 8 mm) 242.1 149.5 65.4 Unit: mm 20.0 71.2 82.4 301.8 115.8 117.0 68 Specifications
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 69
    Wall mount installation Minimum installation requirements Computer Resolution: XGA Image Resolution: XGA Image Diagonal (inches) Image Height (mm) Image Width (mm) Distance from floor to bottom of image (mm) Distance from screen surface to projector front case (mm) Distance from top case to the top
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 70
    will help you determine the exact mounting position so that it best suits your installation location. • The dimensions supplied are offered as a guide only and may differ depending on several factors relating to any specific installation. • The dimensions are based on the projector being configured
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 71
    Timing chart Supported timing for PC input Resolution 720 x 400 640 x 480 800 x 600 1024 x 768 1024 x 576 1024 x 600 1024 59.978 60.000 66.667 74.546 75.020 75.060 119.518 119.854 119.989 120.000 *Supported timing for 3D function. Pixel Frequency (MHz) 28.322 25.175 31.500 36.000 40.000 50.000
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 72
    Supported timing for HDMI input Resolution 720 x 400 640 x 480 800 x 600 1024 x 768 1280 x 800 1280 x 1024 1280 x 960 1440 x 900 1400 x 1050 1600 x 1200
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 73
    a 1080i@60Hz or 1080i@50Hz signal may result in slight image vibration. Supported timing for Video and S-Video inputs Video mode Horizontal Frequency (kHz) NTSC -M 15.73 PAL-N 15.63 PAL-60 15.73 NTSC4.43 15.73 *Supported timing for 3D function. Vertical Frequency (Hz) 60 50 50 60 50 60
  • BenQ MX813ST Short-Throw DLP Projector | User Manual - Page 74
    parts (labor included). To obtain warranty service, immediately notify the dealer from which you operate the product in accordance with BenQ's written instructions, especially the ambient humidity must be inbetween 10% mechanical, magnetic, optical, chemical, manual or otherwise, without the prior
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
Digital Projector
User Manual
MX813ST