BenQ PU9730 DLP Projector User Manual - Page 13
Install remote controller battery, Connecting to the projector
View all BenQ PU9730 DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
English Install remote controller battery 1. To open the battery cover, turn the remote control over to view its back, push on the finger grip on the cover and slide it up in the direction of the arrow as illustrated.The cover will slide off. 2. Remove any existing batteries (if necessary) and install two new AA batteries observing the battery polarities as indicated in the base of the battery compartment. Positive (+) goes to positive and negative (-) goes to negative. 3. Refit the cover by aligning it with the case and sliding it back up into position. Stop when it clicks into place. 1 2 3 Precautions relating to batteries • Do not mix old batteries with new ones, or mix different types of batteries. • Avoid leaving the remote control and batteries in an excessive hot or humid environment like the kitchen,bathroom, sauna, sunroom, or in a closed car. • Dispose of used batteries according to the battery manufacturer's instructions and local environment regulations for your region. • If the remote control will not be used for an extended period of time, remove the batteries to avoid damage to the control from possible battery leakage. Connecting to the projector If the path between the remote control and the projector is obstructed or remote control operation is disrupt by certain high-frequency fluorescent lights, you can connect to the projector with M3 stereo mini jack cable to operate the projector. HD CONNECT/LAN 13