BenQ PU9730 DLP Projector User Manual - Page 27

Selecting an input source, input signal and display the projected image.

Get BenQ PU9730 DLP Projector PDF manuals and user guides View all BenQ PU9730 DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

English Selecting an input source The projector can be connected to multiple equipment at the same time. When the projector is first turned on, it will attempt to reconnect with the input source which was in use when the projector was last shut down. The Input Source can be selected from the projector's control panel or from the remote control. Refer to the following guide to select the desired input source 1. Press INPUT key on the remote control or control panel to display SOURCE Menu. 2. Select your desired input source via ▲/▼ key. 3. Press ENTER key to confirm the input selection, it will take few seconds to detect the desired input signal and display the projected image. Press RETURN key to projected image if you want to keep current input source. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
English
27
Selecting an input source
The projector can be connected to multiple equipment at the same time. When the projector
is first turned on, it will attempt to reconnect with the input source which was in use when the
projector was last shut down.
The Input Source can be selected from the projector's control panel or from the remote control.
Refer to the following guide to select the desired input source
1. Press INPUT key on the remote control or control panel to display SOURCE Menu.
2. Select your desired input source via
▲
/
▼
key.
3. Press ENTER key to confirm the input selection,it will take few seconds to detect the desired
input signal and display the projected image.
Press RETURN key to projected image if you want to keep current input source.