Beretta 92 FS Compact Inox Operating Instructions

Beretta 92 FS Compact Inox Manual

Get Beretta 92 FS Compact Inox PDF manuals and user guides View all Beretta 92 FS Compact Inox manuals
Add to My Manuals
Save this manual to your list of manuals

Beretta 92 FS Compact Inox manual content summary:

  • Beretta 92 FS Compact Inox | Operating Instructions - Page 1
    Beretta 92FS t4tetta Caliber 9mm Parabellum BERET TA U.S,A, cth-,p. 1:011( .119.-VADE ./. IP WIEWMPORMIllauwa Instructions for operation
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 2
    Caution: Read this manual carefully before handling and loading the pistol. WARNING: Always ensure free of foreign objects. Shooting with an obstruction in the barrel such as dirt, mud, grease, lodged bullet or jacket, residues, etc., can cause barrel bulging and/or rupture. • Never shoot at a flat
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 3
    Field Stripping Simplicity F. Functional and Mechanical Features 1. Slide Catch 2. Ambidextrous Safety-Decocking 3. Special Sights 4. V-Grooved Frame Serration 5. Reversible Magazine Release Button 6. Checkered Grips 7. Combat Trigger Guard GENERAL FUNCTIONAL PRINCIPLE LOADING AND FIRING Loading the
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 4
    Spring and Guide Lubrication Frame Cleaning and Lubrication Magazine Cleaning and Cartridge Rotation After Field Stripping Assembly AMMUNITION Dry Firing/"DUMMY" Rounds TROUBLE SHOOTING, CAUSE AND REMEDIES TECHNICAL SPECIFICATIONS PHOTO ILLUSTRATIONS EXPLODED DRAWING PARTS LIST PARTS AND SERVICE
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 5
    The Beretta 92FS semiautomatic LOCKING SYSTEM: The unique barrel-mounted falling locking block and short barrel recoil stroke ensures long service life and targeting accuracy. , almost doubles the firepower of the traditional single line magazine of same length to a 15 round capacity. (Fig. 1-C, Fig.
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 6
    inertia (primer ding mark) discharge of a cartridge during manual slide manipulation chamber loading as well as automatic slide recoil the hammer pin enters a matching travel groove cut into the underside of the left slide rail to stop the slide breech in case of recoil overtravel. (Fig. 1-D5) E.
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 7
    reciprocating slide is automatically locked open by the slide catch, clearly signaling the magazine is empty. For slide closing by right shooting hand, push the catch the button on the right for convenient operation. After removing both grip panels the device can simply be pushed out of its seat by
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 8
    GENERAL FUNCTIONAL PRINCIPLE All Beretta pistols of the 92 Series are semi-automatic, functioning on the delayed blowback, short barrel recoil stroke principle, utilizing a unique falling locking block system. Considering the pistol magazine and chamber loaded, the hammer fully lowered and the
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 9
    pull, keep the manual safety (Fig. 1-D1) engaged "ON" (red warning dot covered) during loading or unloading. • Push the loaded magazine into the pistol grip well to solid pin catch. When releasing the trigger, its spring will return the trigger to its fully forward position and the firing pin catch
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 10
    magazine. This is an advantage because the magazine spring magazine by depressing the magazine release button. 2. Replenish the magazine with one round only to its full 15-round capacity. 3. Push the magazine into the pistol grip safety. • With the magazine removed, manually retract the slide and
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 11
    barrel/slide unit, compressing the recoil spring, disengaging the locking system, extract and eject the spent cartridge case and cock the hammer. The recoil spring will push the slide forward chambering the next cartridge from the magazine TO FIRE. FIRING AFTER MANUAL HAMMER COCKING: If the safety
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 12
    to ease the cartridge over the front wall. • Repeat until the magazine is unloaded. MAINTENANCE In an emergency situation a properly maintained pistol loaded disassembled and assembled with the safety "ON" or "OFF." To avoid parts damage DO NOT PULL• THE TRIGGER while removing and mounting the slide.
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 13
    method has the advantage that the thumb can be swung under the slide, supporting the recoil spring/guide unit while pulling the barrel/slide assembly off the frame. • To dismantle the recoil spring guide unit, rest the barrel/slide assembly turned upside down in the palm of your hand, muzzle forward
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 14
    wood applicator to remove stubborn dirt, etc. DO NOT use sharp instruments. Use a good grade of CLP (cleaning-lubricant-preservative) gun oil. Most guns and sporting goods stores can supply suitable cleaning kits. BARREL the slide rails and smooth it out throughout the length of the rails, likewise
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 15
    "ON." RECOIL SPRING AND GUIDE LUBRICATION: Wipe or brush clean the spring and guide. Lightly oil the guide rod. Wipe the spring clean only with rails and moving parts. With a few drops of oil and parts movervient to insure oil penetration, particularly lubricate the disassembling latch, magazine
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 16
    The recoil spring and guide must be parallel to the barrel and slide side walls and particularly important, the head of the recoil spring guide perfectly seated into its half round cutout in the locking block. Thumb pressure on the head will insure perfect seating. NOTE: If the recoil spring plunger
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 17
    shoot cartridges with jacketed bullets through a barrel previously fired with lead bullets before the with the normal use of the manual safety-decocking lever DOES NOT cause firing pin breakage. " cartridges: NOTE: "DUMMY" cartridges with spring loaded "Primer" are excellent but expensive.
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 18
    TROUBLE SHOOTING, CAUSE AND REMEDIES Failure Cause Action Failure to 1. Defective cartridge, bent, indented, feed burred, etc. Replace 2. Dirty chamber and/or action Clean, lubricate 3. Dirty magazine Clean 4. Damaged, indented burred magazine cartridge, bullet Inspect barrel bore may be
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 19
    Dot Night Sights Barrel Length 125mm (4.92 in.) Sight Radius 158mm (6.22 in.) Overall Length 217mm (8.54 in.) Overall Height 140mm (5.51 in.) Overall Width 38mm (1.50 in.) Weight of Pistol 960 g. approx. (33.86 oz.) (w/empty magazine) Weight of Magazine (empty) Weight of Loaded Pistol
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 20
    F3 TTA CORP. Ac.KIM:4A qs u D2 Fl F3 D5 F6 F6 El B F7 F5 F4 D2 _ F4 • • Fig. 1 Fig. 2 Fig D3 F4 ig. 5 Fig. 6 19 Fig. 7 Fig.
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 21
    Fig. 9 Fig. 11 Fig. 13 Fig. 15 Fig. 17 Fig. 10 Fig. 12 Fig. 14 : Fig. 16 Fig. 18 20
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 22
    Beretta U.S.A. EXPLODED DRAWING Model 92 FS Caliber 9mm Parabellum 11 15 ' 5'4qkb 13 -.5__7'4LA, NT- .292_ 35 2.0___ 4_ _2 49_ 69 41 • 25 69\- 51Ji 55 56. 52 _69 L44 NOTE:
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 23
    92 FS Part # Nomenclature 34 35 36 37 38 39 40 41 42 43 46 47 48/49P 48/49W 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 69 Ejector Spring Pin Hammer Hammer Pin Hammer Spring Guide Hammer Spring Hammer Spring Cap Sear Sear Spring Sear Pin Magazine Release Button Magazine
  • Beretta 92 FS Compact Inox | Operating Instructions - Page 24
    relating to maintenance and parts. Parts price list and parts can be ordered from ou,. Product Service Department. Please read the WARRANTY - it gives valuable information concerning in warranty service, or write to: BERETTA U.S.A. CORP. Product Service Dept. 17601 Beretta Drive Accokeek, MD 20607
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
t4t
etta
Beretta
92FS
Caliber
9mm
Parabellum
BERET
TA
U.S,A,
cth
-
,p.
1:011(
.119.-VADE
./.
WIEWMPORMIllauwa
IP
Instructions
for
operation