Beretta 92 FS Compact Inox Operating Instructions - Page 11
Firing, After, Manual, Hammer, Cocking, Unloading, Pistol
View all Beretta 92 FS Compact Inox manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Fire by squeezing the trigger. In the double-action trigger pull mode the hammer will be cocked and released to fall. • The discharge pressure will recoil the locked barrel/slide unit, compressing the recoil spring, disengaging the locking system, extract and eject the spent cartridge case and cock the hammer. The recoil spring will push the slide forward chambering the next cartridge from the magazine and re-engage the locking system. After trigger finger ease-up permitting the trigger to move forward to its single action mode position the PISTOL IS READY TO FIRE AGAIN. • Squeeze the trigger to continue firing. After the first shot is fired all remaining rounds in the magazine will be fired in the single action mode. • When the last round has been fired, the slide is automatically held open by the slide catch (Fig. 11). • To fire again, remove the empty magazine and insert a loaded one. • Press the slide catch (Fig. 1-F1) to load the chamber and close the slide (Fig. 12). • The slide can also be closed for chamber loading by simply retracting and releasing the slide. Caution: THE PISTOL IS NOW LOADED, COCKED, AND READY TO FIRE. FIRING AFTER MANUAL HAMMER COCKING: If the safety is "OFF" and the hammer fully-lowered, and you prefer to fire the first shot by the single action mode, make sure your trigger finger is out of the trigger guard and then manually retract the hammer to its fully-cocked position. WHEN READY TO FIRE, squeeze the trigger. UNLOADING THE PISTOL: • Engage the manual safety (fully down, red warning dots covered). • Depress the magazine release button as to remove the magazine from the pistol. • Grasping the slide serrations with thumb and index finger, fully retract the slide to extract and eject the chambered cartridge. • Holding the slide retracted, visually inspect through the open slide that the magazine well and chamber are clear. WHEN SURE THE CHAMBER IS EMPTY AND THE CARTRIDGE HAS BEEN EJECTED, quickly release the slide for closing. WARNING: To prevent accidents due to wrongful unloading practice - remember: First: REMOVE MAGAZINE Second: CLEAR CHAMBER