Bernina 717 Manual - Page 39
Calculation
View all Bernina 717 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
The Gatherer Presser foot: Gatherer Needle: 80-70 Mercerised sewing thread: 50 Zigzag: 0 Stitch length: 1112_4 Automatic: straight stitch Needle position: centre Drop feed control: sewing The flat piece of material is inclined to slip out of the slot. In order to avoid this the work should be guided as shown in the illustration, by holding the lower piece with the left hand and the upper piece with the right hand. Always pull slightly towards the right hand corner of the presser foot. Calculation: The amount of gather depends on the length of the stitch. The longer the stitch the tighter the gather. For tight gathering the upper piece of material can be pulled a lithe. The material to be gathered always lies under the foot and the flat piece in the slot.