Bernina Aurora 440QE User Guide - Page 11
Free Hand System FHS presser foot lifter, CFL Sewing Light, Slide-on table - used
View all Bernina Aurora 440QE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
CFL Sewing Light Setting up the sewing computer 11 Free Hand System (FHS) presser foot lifter & Your dealer can adjust the FHS if necessary. Contrary to an ordinary bulb, the CFL sewing light has a better illumination and a longer life. Please note that a defective CFL sewing light must ONLY be replaced by an authorized technician. The sewing computer must be brought to an authorized BERNINA dealer! Raising and lowering the presser foot • knee-operated presser foot lever to raise and lower the presser foot - your hands remain free to guide the fabric • with your knee push lever to the right • the feed dog is lowered simultaneously • the feed dog is raised as soon as the first stitch is sewn Attaching the presser foot lifter • insert the lever into respective opening - you should be able to operate the FHS with your knee in your normal sitting position Slide-on table Always raise needle and presser foot when attaching or removing the slide-on table! Larger sewing surface • the slide-on table increases the sewing surface To attach • raise needle and presser foot • slide over free-arm to the right until it engages To remove • raise needle and presser foot • use slight pressure - with your thumb against the housing and the index against the table - to slide it off to the left Seam guide • slide into extension table guides from left or right • can be moved over full table length Scale • «0» corresponds to the center needle position 032907.52.04_1103_a430_a440_a450_EN