Bernina Aurora 440QE User Guide - Page 63
Attaching the module
View all Bernina Aurora 440QE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Attaching the module Attaching the module 63 Attaching the module • place the module on the sewing compu- ter behind the free arm • push the module from the left towards the sewing computer so that the connecting lugs engage in the base plate • Unplug foot control Releasing the cable • the cable connects the module to the sewing computer • pull the cable out of the holder on the back of the module When connecting the embroidery module, attention must be paid that all items are on a flat and even surface! Always separate the module and sewing computer for transportation. Never transport them attached. Connecting the cable • plug with flat side to the front • insert the plug into the socket on the right hand side of the sewing computer Storing the cable on the module • insert the cable into both cable holders • press cable gently to secure Removing the module • unplug cable • grip the back right corner to lift the module and remove to the left 032907.52.04_1103_a430_a440_a450_EN