Binatone F350 User Manual - Page 34

NAVIGATION 8.7 GPS Status When tapped the screen will change to the GPS status screen, Note; this can also be brought up by tapping from any of the navigation screens. This screen shows you information about your current GPS position. Including the date & time, your current speed, your current altitude above sea level and your current position in Longitude and latitude. Included with this information is the number of satellites which you are currently locked on to. The right half of the screen shows the position of these satellites in the sky. Each satellite will be shown by a coloured circle; Orange means that the unit has locked on to the signal, while grey means that the satellite has be found but the unit is not currently locked on to its signal. Each satellite will be identified by a specific number shown inside the circle. Note: In order to navigate you require that the unit is locked to 4 or more satellites and is referred to as a 3D fix. The fix status will be shown above the circle on the right- Inactive means not fixed, active means that a 3D fix has been obtained. 8.8 Miles/Kilometre Tapping this option will change the units of distance; this change will be reflected both on the map and in the voice directions. Tap this option to change between Miles and Kilometres. The currently selected option will be shown on the screen. 8.9 About Tapping this option will show you information relating to the version of navigation software you are running. 8.10 Time Zone Allows you to change the time zone so that the time is always correct for the country you are in There are two options to choose from; manually and automatic. The selected option will be shown with an orange indicator. Automatic - When selected the unit will always set the time zone according to your current GPS position. Manually - When selected you can manually set the time zone by using the and keys to select the desired time zone from the list. 33