Binatone Focus 360 User Guide - Page 25

ENGLISH 7. Help Display No display • Try recharging or replacing the battery pack. • Reset the units. Disconnect the battery pack of the Monitor unit and unplug both the units' electrical power, then plug them back in. • Is the unit turned on? Press and hold the ON/OFF key on the Monitor unit to turn it ON. • Is the correct camera selected? Change the camera number, if necessary. • Is the video display turned on? Press the VIDEO ON/OFF key to turn it on. • When operating using batteries, only the Display will go blank after 2 minutes to save power. The unit is still active and will give you audio alerts. You can reactivate the screen by pressing any key. Registration If the Indoor/Outdoor Camera Unit has lost its link with the Monitor Unit • Try recharging or replacing the battery pack. • If the Indoor/Outdoor Camera Unit is too far away it may be going out of range, so move the Camera closer to the Monitor Unit. • Reset the units by disconnecting them from the battery and electrical power. Wait about 15 seconds before reconnecting. Allow up to one minute for the Indoor/Outdoor Camera Unit and the Monitor Unit to synchronize. • See 2.5 Registration (Pairing), if there is a need to re-register the units. Help 25