Binatone S500 User Manual - Page 40
Safety Alert, 3 Trace Record, If you have previously recorded any trace
View all Binatone S500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
NAVIGATION 8.2 Safety Alert Tap to open the safety alert options screen. From this screen you can set two separate safety alerts. Speed camera on - This lets you activate or deactivate the speed camera warning, when activated the unit will warn you of an approaching speed camera visually and shows you the distance to the camera. When the option is shown highlighted blue it is activated. Speed alert when exceeding the road speed limit - This lets you activate or deactivate the road speed limit warning. As well as speed camera locations, the unit contains information about the speed limit of many roads. When activated the unit will show you the speed limit for the road you are on with a fixed speed limit icon, if you exceed the speed limit (including any tolerance you have set) for the road you are on the speed limit icon will flash and the unit will beep. When the option is shown with an blue indicator it is activated. When active you can then change the speeding tolerance using the and keys to select the tolerance you would like from 0%, 5%, 10%, 15% and 20%. The unit will then only warn you when you exceed the speed limit by more than this percentage. Set the required options and tap to confirm the unit will then return to the settings screen. 8.3 Trace Record The unit is capable of logging all positioning information received from the GPS satellites during navigation. It then uses this information to draw a track of the route on the map. This enables you to review the route at a later time. If you have previously recorded any trace records these will be shown in the list. If there are no trace records you will have to record one first. Recording a trace record: Use the button to start the recording process. When active this button will then change to show . In this way the key will always show the option which is currently not selected. It is recommended that you start recording after your route has been planned or when you are in Free Navigation and you have a valid GPS signal, and you should stop recording once you have reached your destination. This will prevent the unit from continually recording while you are not driving and it will also divide each journey into a separate trace record. Once you have started a trace recording you will need to return back to the map screen. Note: if you switch the unit off without stopping the trace record function then your trace record for that journey will be lost. 40