Biostar G965 MICRO 775 BIOS setup manual - Page 38

CPU Clock Ratio, CPU Clock, PCIE Clock Select, PCIE Clock, CPU Voltage, FSB Termination Voltage

Get Biostar G965 MICRO 775 PDF manuals and user guides View all Biostar G965 MICRO 775 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

G965 Micro 775 CPU Clock Ratio This item allows you to select the CPU Ratio. Min= 8 Max= 50, Key in a DEC number. The Choices: 8X (default). CPU Clock This item allows you to select CPU Clock, and CPU over clocking. Min= 100 Max= 333 Key in a DEC number. The Choices: 100Mhz (default). Special Notice: If the system's frequency that you are selected is not functioning, there are two methods of booting-up the system. Method 1: Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as " ON" status. All the CMOS data will be loaded as defaults setting. Method 2: Press the key and Power button simultaneously, after that keep-on pressing the key until the power-on screen showed. This action will boot-up the system according to FSB of the processor It's strongly recommended to set CPU Vcore and clock in default setting. If the CPU Vcore and clock are not in default setting, it may cause CPU or M/B damage. PCIE Clock Select The Choices: Auto (default), Upto CPU, Fixed 100, Manual. PCIE Clock The Choices: 100MHz (default), Min=100; Max=200; key in DEC number. CPU Voltage This item allows you to select CPU Voltage Control. The Choices: StartUp (default), +0.012V ~ +0.787V. FSB Termination Voltage This item allows you to select FSB termination Voltage. The Choices: 1.2V (default), 1.3V, 1.4V, 1.5V. 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
G965 Micro 775
37
CPU Clock Ratio
This item allows you to select the CPU Ratio.
Min= 8
Max= 50, Key in a DEC number.
The Choices: 8X
(default).
CPU Clock
This item allows you to select CPU Clock, and CPU over clocking.
Min= 100 Max= 333
Key in a DEC number.
The Choices: 100Mhz
(default).
Special Notice:
If the system’s frequency that you are selected is not functioning, there are two
methods of booting-up the system.
Method 1:
Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as “ON” status. All
the CMOS data will be loaded as defaults setting.
Method 2:
Press the <Insert> key and Power button simultaneously, after that keep-on
pressing the <Insert> key until the power-on screen showed.
This action will boot-up the system according to FSB of the processor
It’s strongly recommended to set CPU Vcore and clock in default setting. If the
CPU Vcore and clock are not in default setting, it may cause CPU or M/B
damage.
PCIE Clock Select
The Choices: Auto
(default), Upto CPU, Fixed 100, Manual.
PCIE Clock
The Choices: 100MHz
(default)
,
Min=100; Max=200; key in DEC number.
CPU Voltage
This item allows you to select CPU Voltage Control.
The Choices: StartUp
(default), +0.012V ~ +0.787V.
FSB Termination Voltage
This item allows you to select FSB termination Voltage.
The Choices: 1.2V
(default), 1.3V, 1.4V, 1.5V.