Biostar NF4UL-A9 NF4UL-A9 BIOS guide - Page 24
USB Resume from S3, Power-On by Alarm, POWER After PWR-Fail
View all Biostar NF4UL-A9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
NF4UL-A9 USB Resume from S3 The Choices: Disabled (default), Enabled. Power-On by Alarm When you select Enabled, an alarm returns the system to Full ON state. The Choices: Disabled (default), Enabled. POWER After PWR-Fail This setting specifies whether your system will reboot after a power fail or interrupts occurs. Off Leaves the computer in the power off state. On Reboots the computer. Former-Sts Restores the system to the status before power failure or interrupt occurs. The Choices: Off (default), On, Former-Sts. 23
NF4UL-A9
23
USB Resume from S3
The Choices: Disabled
(default), Enabled.
Power-On by Alarm
When you select Enabled, an alarm returns the system to Full ON state.
The Choices: Disabled (default),
Enabled.
POWER After PWR-Fail
This setting specifies whether your system will reboot after a power
fail or interrupts occurs.
Off
Leaves the computer in the power off state.
On Reboots the computer.
Former-Sts Restores the system to the status before power failure or
interrupt occurs.
The Choices: Off
(default), On, Former-Sts.