Bissell BARKBATH Portable Dog Grooming & Bathing System 1st Gen 1844 User Guid - Page 10
Bathing Your Dog continued
View all Bissell BARKBATH Portable Dog Grooming & Bathing System 1st Gen 1844 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Bathing Your Dog (continued) 5 6 Set the Rinse/Shampoo switch to the desired setting. For Shampoo, the reservoir will dispense a mixture of shampoo and water; for Rinse, it will dispense just water. Prime the system by pointing the nozzle at the microfiber mat and pressing and holding the spray trigger for 15-20 seconds to allow solution to dispense. NOTE: The Dog Bathing Tool is always extracting dirty water. The trigger dispenses the shampoo and/or water. While pressing the trigger, it also continues extracting dirty water. 7 8 9 Place the tool directly onto the dog's coat before pressing and holding the spray trigger to release the shampoo/water onto your dog's coat. Press and hold the spray trigger while gently stroking the nozzle of the bathing tool downwards, following the fall of the dog's coat. Release the spray trigger and use "drying strokes" to suction up moisture from the dog's coat. Repeat as needed. 10 11 Spray shampoo/water on the microfiber towel and hand clean delicate areas such as the dog's face and paws. 10 www.BISSELL.com As a final step, coat should be airor towel-dried as needed.