Bissell BARKBATH Portable Dog Grooming & Bathing System 1st Gen 1844 User Guid - Page 7

Preparing Your Cleaner WARNING To reduce the risk of injury to your pet, do not boil or microwave water. Use only warm tap water. 1 2 Remove the clean water tank by lifting it straight up and then away from the unit. 3 4 To ensure your pet has a nice bathing experience, use warmto-the-touch tap water to the fill line on your clean water tank. Replace the cap before returning the tank to the machine. 5 Before connecting 6 the bathing tool, you will need to prime the system. Place the unit on a high, flat surface (such as a table or counter top). 7 8 Hold the flex hose end over the microfiber mat or towel and press the trigger at the end of the flex hose for 15-20 seconds to allow water to dispense. Flip the tank so the black cap is on top and unscrew. Pull up to remove cap assembly from tank. Replace the clean water tank by lining up the grooves on the clean water tank with the vertical guides on the side of the unit. Gently slide it down into position. Plug the unit in and press the power switch to ON ( I ) position. Turn the unit OFF, pressing the power switch to ( O ) OFF position. www.BISSELL.com 7