Bissell BARKBATH Portable Dog Grooming & Bathing System 1st Gen 1844 User Guid - Page 12

Cleaning Your BarkBath™ After Use WARNING To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. 1 2 Turn power switch to the OFF (O) position and unplug power cord from outlet. Remove and rinse out the dirty water tank following instructions in the "Emptying the Dirty Water Tank" section. 3 4 5 Press release button and disconnect flex hose from the dog bathing tool by pulling straight out. (DO NOT twist tool to remove.) Once removed from flex hose, keep tool elevated to avoid dripping water on floor and rinse clean under running water. Flip tool to release water into sink. While holding the tool in the air and reservoir in the sink, press the trigger to assure all water empties from the hose. 6 7 8 Check spray nozzle for accumulated dirt or debris. If necessary, clean with soft bristle brush. You may disassemble the spray nozzle for cleaning as needed. Removing the faceplates will expose longer spray nozzles. Be sure all pieces are completely dry before returning to base unit and before storage. 12 www.BISSELL.com