Bissell BARKBATH Portable Dog Grooming & Bathing System 1st Gen 1844 User Guid - Page 8

Attaching the Bathing Tool NOTICE: Dish soap, traditional dog or human shampoos and/or conditioners should not be used as they may be too thick and may damage the machine. Use only BISSELL No-Rinse Dog Shampoo in your Portable Dog Bath System. Use of shampoos or soaps which contain lemon or pine oil may damage this appliance and void the warranty. These products may react with the plastic materials used in your cleaner, causing cracking or pitting. 1 2 Locate the bathing tool and BISSELL No-Rinse Dog Shampoo. Unscrew the cap to the shampoo reservoir to unattach it from the bathing tool. 3 4 Holding the tool right side up, add BISSELL No-Rinse Dog Shampoo to the shampoo reservoir. Align the screw cap with the tabs of the reservoir opening and twist shut. TIP: Since every dog is unique, first start by adding a small amount of BISSELL No-Rinse Dog Shampoo to reservoir. Continue to add more shampoo as needed to effectively clean your dog. 5 6 Holding the tool horizontally on a flat surface (such as a table or counter top), attach the bathing tool to the cleaner by inserting the flex hose connector into the shampoo tool connector. You will hear a "click" when it locks into place. Prime the tool by pointing the nozzle at the microfiber mat and pressing and holding the spray trigger for 15-20 seconds to allow solution to dispense. NOTE: The "factory setting" of the spray nozzle is optimized for use on most hair lengths/types with the exception of thick/heavy/dual and longer coated dogs. 8 www.BISSELL.com