Bissell DeepClean Premier Pet Deep Cleaner 17N4 User's Guide - Page 13
Mainµn°ce & Care
View all Bissell DeepClean Premier Pet Deep Cleaner 17N4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Maintenance & Care Machine care Tip For best results, a few simple steps can assure your machine is well maintained after your cleaning is complete. 1. Flush your machine of any remaining residual solution. » Let all parts dry completely before storing a. Fill the 2-in-1 water tank with clean hot tap water. WARNING b. Recline the handle and press the spray trigger for 15 seconds while making forward and backward passes on carpet. Release the trigger to suction. Repeat for another 15 seconds. Continue without pressing the trigger until there is no more water being suctioned. To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. 2. Push the power button to turn the machine off. Unplug the machine and wrap the power cord. Empty the 2-in-1 water tank. 4. 3. Rinse out 2-in-1 water tank with hot tap water, taking care to clean underneath the heavy duty bladder and all around it. Filter 4. The top half of the tank can be rinsed clean through the nozzle area. Clear the red filter of any debris that may have accumulated. 5. Keeping the 2-in-1 water tank off the base of the machine, simply remove the floor nozzle by turning the locking keys (see image for location) to the "unlock" position and lift up. Rinse the floor nozzle at the faucet. 6. Any loose hair or debris can be pulled from the brush rolls and thrown away. For the most thorough clean before storage, follow directions below for removal and replacement of the brush 5. 6. rolls and belts. 7. Replace nozzle by lining up the locking keys with their slots and placing the nozzle and end caps back onto the foot of the machine. Secure into place by turning the locking keys to the "lock" position. 8. To clean attachments that may have been used, remove from hose and rinse under clean, running water. Dry and replace attachment in the hose rack. Clean the hose by suctioning clean water from the tap. Before replacing, lift end 9. of hose and stretch out to ensure all water is cleared from hose. Refer to page 9. Diverter 9. To clean the suction diverter, remove the two screws on the back of the diverter housing. Take the diverter housing to a sink and rinse it with water. Take care to remove any debris that may build up and cause a clog. Replace the diverter housing and the two screws. 10. After carpet is dry, vacuum again to remove hair and fuzz. www.bissell.com 800.237.7691 13