Bissell DeepClean Premier Pet Deep Cleaner 17N4 User's Guide - Page 8

Carpet cleaning

Page 8 highlights

Operations Carpet cleaning 1. Plug into a proper outlet and push the on/off button located on the front of the handle. 2. Recline the handle by pressing on the lever 1. 2. at the back of the machine behind the 2-in-1 water tank. 3. Cleaning Strokes. While pressing the trigger, make one slow forward wet pass and another one back. Caution: Do not overwet. Take care not to run over loose objects or edges of area rugs. Stalling brush may result in premature belt failure. Note: Your machine is equipped with a circuit breaker that will automatically shut off the brush if a large or loose object is caught in the brush roll. If that happens, be sure to unplug your machine, remove the foreign object, and then plug the machine back in to reset the circuit breaker. 4. Release the trigger and make one slow forward and backward pass over the same area to remove any residual dirty water and aid in drying. Repeat cleaning passes until solution being pulled up appears clean. Continue passes without pressing the trigger until you can't see any more water being pulled up. www.bissell.com 8 800.237.7691

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

Operati´s
Carpet cleaning
1.
Plug into a proper outlet and push the on/off
button located on the front of
the handle.
2.
Recline the handle by pressing on the lever
at the back of the machine behind the 2-in-1
water tank.
3.
Cleaning Strokes. While pressing the trigger,
make one slow forward wet pass and another
one back.
Caution: Do not overwet.
Take care
not to run over loose objects or edges of area
rugs. Stalling brush may result in premature
belt failure.
NOTE: Your machine is equipped with a circuit
breaker that will automatically shut off the
brush if a large or loose object is caught in the
brush roll. If that happens, be sure to unplug
your machine, remove the foreign object, and
then plug the machine back in to reset the
circuit breaker.
4.
Release the trigger and make one slow
forward and backward pass over the same area
to remove any residual dirty water and aid in
drying. Repeat cleaning passes until solution
being pulled up appears clean. Continue
passes without pressing the trigger until you
can’t see any more water being pulled up.
1.
2.
www.BISSELL.com
800.237.7691
8