Bissell DeepClean Premier Pet Deep Cleaner 17N4 User's Guide - Page 14

Maintenance & Care Drive belt removal & replacement Occasional replacement of one or both belts may become necessary. If that is needed, please 3. follow the instructions below. 1. Turn off the machine, and unplug it from the outlet. 2. Remove the 2-in-1 water tank. Set aside. 3. Remove the nozzle and end caps by following the instructions in Step 5 on page 13. 5. 4. Turn the machine on its side. IMPORTANT: cord side up. 5. Remove 1 silver screw from the pivot arm. 6. Remove pivot arm by gently lifting up. 7. Remove the drive belt and replace it by first attaching it to the small drive wheel, then attach it to the end of the inside brush. Fluid Connection Point Filter Maintenance Periodic cleaning of the fluid connection point in the spray nozzle may be required. 1. 1. To clean the fluid connection point, remove the nozzle and turn it over. 2. Clean the filter on the end of the fluid connection point with a small paperclip and re-attach the nozzle to the machine. 4. 7. 2. www.bissell.com 14 800.237.7691