Bissell PowerSteamer PowerBrush Select Deep Cleaning System 1623 User Guide - Page 11
Hard Floor Cleaning
View all Bissell PowerSteamer PowerBrush Select Deep Cleaning System 1623 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Operation Hard Floor Cleaning Your deep cleaner may have come with a hard floor tool and Hard Floor Solutions Formula. The hard floor tool provides effective cleaning for linoleum, vinyl, and tile floors. Caution: Do not use on unsealed hardwood floors. 1. Thoroughly vacuum or sweep floor to pick up any debris. NOTE: Prior to filling with formula and water, be sure all carpet cleaning formula is thoroughly rinsed from tank. 2. Fill BISSELL 2X Hard Floor Solutions Formula to the indicated fill line in the built in measuring cup and pour into mouth of bladder. 3. Fill the bladder with clean hot tap water and set aside. 4. Attach the hard floor tool to the bottom of the machine by hooking it into the nozzle and swinging it down until it clicks into place. 5. Be sure the ReadyTools dial is set to FLOOR CLEANING. 6. Plug into an outlet and turn the power ON. 7. Plan your cleaning route to leave an exit path. Be sure to allow adequate time for floors to dry. 8. While pressing the spray trigger, make one slow forward wet pass and another back. Caution: Do Not Overwet. 9. Repeat the motion without pressing the trigger using the hard floor tool to squeegee and suction up the dirty water. 10. When finished, remove the hard floor tool, rinse and let dry before storing. Refer to the Maintenance section on page 12 for machine clean up and storage instructions. WARNING: To reduce the risk of fire and electric shock- when cleaning a hard floor, the BISSELL hard floor tool 203-5641 must be used and it must only be used with BISSELL Hard Floor Solutions or BISSELL 2X Hard Floor Solutions cleaning fluid intended for use with this appliance. 4. www.bissell.com 800.237.7691 161