Bissell PowerSteamer PowerBrush Select Deep Cleaning System 1623 User Guide - Page 8

Operation Fill the 2-in-1 water tank (continued) 5. Replace the top of the tank by matching 5. the lid and tank edges. Handle must be in the forward position in order to replace lid. Rotate the handle to the carrying position to latch the lid. Note: Remember to secure the lid and test to make sure it is secure before picking up the tank. 6. Place tank into machine base, seating firmly 6. in place. Rotate tank handle back into latched position. Carpet cleaning strokes 1. Plug the deep cleaner into a proper outlet. Turn the power ON by pressing the red power switch on the back of the unit with your foot. 2. With your foot, press the gray handle release lever located on the back of unit below water tank. Tip: Thorough vacuuming before deep cleaning will prevent early clogging of the lint trap. 3. While pressing the spray trigger, make one slow forward wet pass and another back. Let the BISSELL 2X advanced deep cleaning formula and DirtLifter PowerBrush do the work for you. Caution: Do not overwet. Handle Release Power Switch 4. Release the spray trigger and make one slow forward and backward pass over the same area to remove any residual dirty water and aid in drying. 5. Repeat cleaning passes until solution being pulled up appears clean. Continue passes without pressing the trigger until you can't see any more water being suctioned up. WARNING: To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner. Non-BISSELL cleaning solutions may harm the machine and void the warranty. 186 w w w . b i s s e l l . c o m 800.237.7691