Bissell PowerSteamer PowerBrush Select Deep Cleaning System 1623 User Guide - Page 5

Assembly Your deep cleaner comes in five easy to assemble components: • Handle assembly • Upper body assembly • Upper hose rack • Lower body assembly • Lower hose rack Three Phillips head screws are included and can 1. be found taped to the handle assembly. The only tool you will need to assemble your cleaner is a Phillips head screwdriver. 1. Slide upper body assembly onto lower body and secure with two screws. 2. With the "tabs" on upper hose rack pointing toward top of handle, attach upper 2. hose rack to handle assembly by sliding it to top of handle until it can go no further. Turn hose rack until it snaps into place. 3. Slide handle assembly down into upper body until it will go no further and secure with screw. 4. Attach lower hose rack to back of upper 3. body by pushing into open slots and sliding down until it snaps into place. 5. Wrap flex hose around hose rack and secure it into notched out holder as shown. 6. Keep flex hose locked in place with hose secure latch. Warning: Do not plug in your cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures. Tab Upper Hose Rack 4. 5. 6. Hose Secure Latch Notch www.bissell.com 800.237.7691 156