Bissell ProHeat Pet Upright Carpet Cleaner 1799 User Guide - Page 13

Maintenance: Machine Storage WARNING To reduce the risk of fire, electric shock, or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. 1 Once your cleaning is complete, make sure the water tank is emptied and rinsed out. Put the unit away in a closet or basement for the next use. NOTE: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing. Freezing will damage internal components and void the warranty. Maintenance: Machine Care A few simple steps can assure your machine is well maintained after your cleaning is complete. 1 2 3 Turn power off and unplug the machine. Always wrap the power cord and make sure the hose is securely wrapped. The final empty of the 2-in-1 tank should always get an extra rinse-out. Rinse under and around the bladder as well as the lint screen. Clean the Flow Indicator filter after each use. Unscrew the cap to lift the red rotor and white filter. Rinse all parts with water and return them to the machine. Twist the cap back on, but do not over-tighten. 4 Insert the Nozzle Clean Out Tool into the thin slot, on the end of the nozzle that touches the floor. Clean until free of pet hair or debris. Use the opposite side of the tool to clean the brush rolls by combing the bristles to help loosen hair or debris. Nozzle and Brush Roll Cleaning Wipe the machine's exterior with a soft cloth. Once your carpet is dry, vacuum again to remove any excess hair or fuzz on your carpet. www.BISSELL.com 13