Bissell ProHeat Pet Upright Carpet Cleaner 1799 User Guide - Page 6
Warning
View all Bissell ProHeat Pet Upright Carpet Cleaner 1799 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Assembly WARNING Do not plug in your deep cleaner until you are familiar with all instructions and operating procedures. Your deep cleaner comes in 5 easy-assemble components. -Upper Handle -4 Screws Taped to Handle -Deep Cleaner Base -Tool Caddy -2 Hex Nuts The only tool you will need to assemble your deep cleaner is a Phillips screwdriver. 1 2 1 2 First, slide the Upper Handle on to the base. 1-From the flat side of the Tool Caddy, feed the power cord through the rounded-rectangle opening. 2-Next, align the Tool Caddy with the Upper Handle holes. 3 4 2 2-Insert 2 screws into 1 lower 2 holes located just above the Lower Hose Rack. Turn the screws until tight- ened. 1- Place hex nut into back of Tool Caddy and hold in place. Insert bolt from the front to the back, turning the bolt into the hex nut until snug. Do not over tighten. Repeat for the second bolt and hex nut. Attach tools to the end of the hose or front of the upper handle. Wrap the power cord and hose. 6 www.BISSELL.com