Blendtec Total Blender Classic FourSide Owners Manual - Page 4

1.4 NEVER OPERATE THE BLENDER IF IT APPEARS DAMAGED If the blender malfunctions, call your service agent first. If it is dropped or damaged in any way, return the blender to a Blendtec service agent immediately for examination, repair, electrical or mechanical adjustment, or possible replacement. 1.5 NEVER OPERATE BLENDER IN LIQUID To protect against the risk of electrical shock do not put the motor base in water or other liquid. Do not use the blender outdoors where it is subject to precipitation. 1.6 NEVER PUT NON-FOOD ITEMS INTO JAR Utensils, rocks, and glass are dangerous if placed in jar. Damage caused by such foreign objects will void the warranty. Keep hands and utensils out of jar while blending to reduce the risk of severe injury to persons or damage to the blender. Utensils may only be used when the blender is not running. 1.7 NEVER OPERATE THE BLENDER WITHOUT THE LID IN PLACE 1.8 NEVER OPERATE THE BLENDER USING ATTACHMENTS NOT SOLD BY BLENDTEC The use of any unauthorized attachments may cause fire, electric shock, and/or injury and will void the warranty. 1.9 BLENDER JAR MUST BE PROPERLY IN PLACE WHILE APPLIANCE IS OPERATING 1.10 BLADES ARE SHARP! HANDLE CAREFULLY! 1.11 WARNING, DO NOT BLEND HOT LIQUIDS OR OTHER HOT INGREDIENTS 1.12 USE CAUTION WHEN BLENDING ON THE SOUP CYCLE When blending on the soup cycle, friction of the blade will heat the contents. The vented lid will allow pressure relief. Be careful not to come in contact with any steam coming from the clear center lid. 1.13 POWER CORD PRECAUTIONS • NEVER operate with a damaged cord or plug. If the supply cord is damaged it must be replaced by the manufacturer or authorized service agent to avoid a hazard. • DO NOT permit the cord to hang over the edge of the work surface. • NEVER use an extension cord with the unit. 2 • Unplug the blender motor when not in use, before changing blender locations, or cleaning. 1.14 NEVER ATTEMPT TO REPAIR THE POWER UNIT Never remove the blender motor cover. The blender motor does not contain self-adjustable or serviceable parts. A qualified service agent must make all service adjustments. Removing the cover or attempting to service the blender will void the warranty. 1.15 TURN THE POWER SWITCH OFF WHEN NOT IN USE The Power Switch (ON/OFF switch) is located on the back of the blender motor cover. 1.16 AVOID TOUCHING THE BLENDER DRIVE SOCKET AFTER EXTENSIVE USE The blender drive socket may become hot after numerous cycles. 1.17 SAFETY This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. 1.18 THE TOTAL BLENDER IS INTENDED FOR HOME USE ONLY! ANY USE OF THE TOTAL BLENDER FOR COMMERCIAL PURPOSES VOIDS ALL WARRANTIES 1.19 NEVER OPERATE THE BLENDER WITH MORE THAN THE MARKED CAPACITY OF THE JAR SAVE THESE INSTRUCTIONS SECTION 2: UNPACKING SAVE ALL PACKAGING MATERIALS AND INSTRUCTIONS FOR FUTURE USE 2.1 UNPACKING YOUR BLENDER You should have received the following items: • TOTAL BLENDER™ motor base • Blender jar with lid • Recipe book • Owner's manual 3