Bosch HMV9302 Installation Instructions - Page 6

PARTS, TOOLS, MATERIALS YOU WILL NEED THE FOLLOWING TOOLS AND MATERIALS FOR THE INSTALLATION: Carton or other heavy material for covering the counter top. Clear tape (for taping the templates to the wall) Stud finder or thin nail. Saber saw (for cutting vent holes for roof or wall venting) Phillips screwdriver Pencil Flat blade screwdriver Keyhole saw (for the power cord hole) Electric drill 3/8" and 3/4" wood drill bits 1/2" and 3/16" drill bits Plumb line Measuring tape (metal preferred) Duct Tape Small side cutters or tin snips Caulking gun • If you have brick or masonry walls, you will need special hardware and tools. • The ductwork you need for the installation is not included. All wall and roof caps must have a back-draft damper (shown on page 5). 6