Bosch KBE-495V28-20N Instruction Manual - Page 17

KBE and KBN Series Installation | en 5 4. Connect the fiber optic cable to the fiber optic video connector on the fiber optic transmitter. See Figure 3.4. CAUTION! Make sure that the bend radius of the fiber optic cable is in accordance with the ! cable manufacturer's specifications when dressing the fiber optic cable. Figure 3.4 Connecting the Fiber Optic Cable to the Transmitter Reference 1 2 Description Fiber optic cable Video connector on fiber optic transmitter 5. If an unterminated fiber optic cable is being used, a fitting may be used in the mounting foot of the camera housing. The fiber optic cable should be terminated with an ST connector in accordance with the connector manufacturer's recommendations. 6. Seal the hole in the mounting foot of the camera housing with RTV or an equivalent seal. See Figure 3.5. If a fitting was used in the mounting foot along with an unterminated fiber optic cable, apply the seal around the optical cable before tightening the fitting, to prevent slippage. A split rubber sleeve (not supplied) may be used for this purpose. Figure 3.5 Seal the Hole in the Housing Foot Reference 1 Description Seal with RTV 7. Attach the housing to the mount in accordance with the KBE and KBN Series Instruction Manual. Bosch Security Systems, Inc. Instruction Manual F01U065975 | 1.0 | 2007.04